Robot 364 MPA

High reach, flexibility, high production, good stability and still compact - your chose is Robot 364 MPA. Robot 364 MPA, Multi Purpose Arm, is a versatile hydrodemolition machine for high-speed, selective, vibration free removal of damaged concrete from horizontal, vertical and over-head surfaces. The equipment has considerable operational flexibility, very good stability for a variety of hydrodemolition tasks. The 360-serie has been used for all kinds of hydro-demolition works around the world. The robot is very robust and can take a lot of power, in other words the capacity can be high if a large powerpack is used.

Fitted with the optional hydraulically driven rotor head the Robot is ideal for surface preparation on concrete bridge decks or industrial floors or steel surface preparation for example ship hulls or decks.

Design
The four wheeled carrier, with its 2-wheel drive and rear wheel steering, provides unrivalled mobility and stability combined with simple set-ups. On the Robot 364 also the height of the steering wheels is adjustable, which adds an additional degree of freedom when positioning the feed beam. The width between the front wheels is hydraulically adjustable to further improved stability. This carrier supports and directs a special high pressure water jetting nozzle. This nozzle is mounted on an oscillating cassette and is running back and forth along the feed beam.

The water jet moves with a sweeping action to cut away concrete behind any reinforcement. The feed beam is attached to an articulated boom with a rotating joint that is mounted on to a 360° rotating turntable. The boom has a maximum reach of 6.0 m (19 ft 8 in) above ground level and 2.4 m (7 ft 11 in) below. The feed beam has 2.0 m (6 ft 7 in) cutting width.

The Conjet Robot 363 driven by an electrically 11 kW (15 hp) powered hydraulic system, controlled by an incorporated PLC microprocessor and monitored from a display. The PLC system permits the operator to set a variety of operational parameters in manual or automatic mode to ensure maximum productivity.

PLC controlled control system
From an operators terminal all functions are set and monitored.
There is a variety of pre-set parameters (programs) to choose from. These programs assist the operator when choosing the base settings for the job. Once selected the unit is ready to go. The Close Loop System monitors the progress of operation from the same terminal.

The remote control box is used to manoeuvre all functions of the robot. This includes the positioning of the cutting head, boom system and wheels. Automatic operation commences by pushing the appropriate button.

Recommended for whom?
This robot is suitable for any customer that intends to enter this market further is this robot suitable for parking decks, retaining walls, over head work and very suitable for turbine house were removal of a circular surface is required.

Features

• Replaces dangerous work such as hand lancing and jack hammering in confined areas.
• Electrical driven in order to protect the operator from exhaust inside a building.
• Remotely operated - radio as retrofit option
• Extreme reach, 6 meters, in continues motion with good stability.
• Reaches below and under a bridge or a quay deck.
• See additional features in the hydrodemolition method.

Power and reaction force
The Powerpack, high pressure water pump, recommended for the Robot 364 MPA to be used are Powerpacks rated 300kW (410 hp) up to 550kW (750 hp) as long as the allowed reaction force is not exceeded. The maximum reaction force Robot 364 MPA is designed for is 2000N (Newton) which is equal to 270 l/min. (71 US gal/min.) at 1000 bar (14500 psi) or 220 l/min. (58 US gal/min.) at 1400 bar (20300 psi).

» Product information
» Conjet hydrodemolition method
» Accessories (pdf file 673 kb)