Robot 364 STD

Very good production for an all round machine and Robot 363 STD will do. Robot 364 STD, Standard version, is a versatile hydrodemolition machine for high-speed, selective, vibration free removal of damaged concrete from horizontal, vertical and surfaces in the ceiling. The equipment has considerable operational flexibility, very good stability and with a choice of different extension arms and feed beams that can be adapted to provide easy access for reaching and working in relatively confined spaces on a variety of hydrodemolition tasks.

The 360-serie has been used for all kinds of hydro-demolition works around the world. The Robot is very robust and handles a lot of power, in other words the capacity can be high if a large powerpack is used. This Robot have also been successfully used inside parking decks where it can remove concrete from the floor as well as the wall and the ceiling, inside the turbine houses as it can pivot around a centre point and in tunnels where concrete has been removed from the wall as well as the ceiling.

Fitted with the optional hydraulically driven rotor head the Robot is ideal for surface preparation on concrete bridge decks or industrial floors or steel surface preparation for example ship hulls or decks.

Design
The four wheeled carrier, with its 2-wheel drive and rear wheel steering, provides unrivalled mobility and stability combined with simple set-ups. On the Robot 364 also the height of the steering wheels is adjustable, which adds an additional degree of freedom when positioning the feed beam. The width between the front wheels is hydraulically adjustable to further improved stability. This carrier supports and directs a special high pressure water jetting nozzle. This nozzle is mounted on an oscillating cassette and is running back and forth along the feed beam.

The water jet moves with a sweeping action to cut away concrete behind any reinforcement.The feed beam is attached to a boom with a rotating joint that is mounted on a 360° rotating turntable. The boom has a maximum reach of 3500 mm (11 ft 6 in) and with an extension arm of 1000 mm (3 ft 4 in) can the reach increase to 4500 mm (14 ft 9 in). The feed beam has 2000 mm (6 ft 7 in) cutting width.

The Conjet Robot 364 is driven by an electrically 11 kW (15 hp) powered hydraulic system, controlled by an incorporated PLC microprocessor and monitored from a display. The PLC system permits the to set a variety of operational parameters in manual or automatic mode to ensure maximum productivity.

PLC controlled control system
From an operator´s terminal all functions are set and monitored.

There is a variety of pre-set parameters (programs) to choose from. These programs assist the operator when choosing the base settings for the job. Once selected the unit is ready to go. The Close Loop System monitors the progress of operation from the same terminal.

The remote control box is used to manoeuvre all functions of the Robot. This includes the positioning of the cutting head, boom system and wheels. Automatic operation commences by pushing the appropriate button.

Recommended for whom?
This Robot is suitable for any customer that intends to enter this market, further this Robot is suitable for parking decks, retaining walls and very suitable for turbine house were removal of a circular surface is required.

Features

• Replaces dangerous work such as hand lancing and jack hammering in confined areas.
• High capacity as it can handle high power.
• Electrical driven in order to protect the operator from exhaust inside a building.
• Remotely operated - radio as retrofit option.
• See additional features in the hydrodemolition method.

Power and reaction force
The Powerpack, high pressure water pump, recommended for the Robot 363 STD to be used are Powerpack's rated 300kW (410 hp) up to 800kW (1070 hp) as long as the allowed reaction force is not exceeded. The maximum reaction force Robot 363 STD is designed for is 3000N (Newton) which is equal to 400 l/min. (106 US gal/min.) at 1000 bar (14500 psi) or 340 l/min. (90 US gal/min.) at 1400 bar (20300 psi).

» Product information
» Conjet hydrodemolition method
» Accessories (pdf file 673 kb)

Attachment - extension arm
Up to 3.5 m and with extension arm up to 4.5 m